Wri400 - Vanderbilt lite blue Manual

Chapter 8 Schlage Adaptable AD-400 Series

WRI400

The WRI400 is a networked access point controller that communicates with
Panel Interface Module (PIM400-485-VBB). It is designed to provide wireless connectivity to electronic access
control components including credential readers, door position and request to exit switches.
Performance

Verification Time - Less than 0.10 second (not including panel delays)

Communications (Heartbeat) Interval - Configurable in 1 second increments from 1 second to 18 hours.
Heart Beat can be set to 1 second for override operation

Features - Tamper Switch, Door Status Monitoring, Door Strike Relay, Aux Relay, and 2 Reader Head
operation.

Inputs - Request-to-Enter, Request-to-Exit, Door Position Switch, Reader Tamper 1, Reader Tamper 2

Addressing
Card formats

Accepts card formats up to 255 bits.
Operational environment

Temperature - -31ºF (-35ºC) to 151ºF (66ºC)

Humidity - 0 - 100% condensing
Power source

Power Requirements - 12 VDC or 24 VDC; 500 mA maximum current
Radio Frequency (RF)

Optional Dynamic Channel Switching

900 MHz spread spectrum, direct sequence, 10 channels

Frequency - 902-928 MHz

Data Rate - RF: 40 kbps

Modulo 256 error detection

Encryption: AES-128 bit keys

Approvals - FCC and RSS-210 (Canada)

Transmitter Power - Up to 300mW

Receiver Sensitivity - 90dBM typical

Remote antenna modules - The PIM modules are capable of accommodating Remote Antenna Modules.
VLBIM06/15/15 v4.1.0
- The PIM includes an RF Transceiver.
lite blue
via RF through a mating
99