Vanderbilt lite blue Manual page 139

138 lite blue Installation Manual
VEVMS DVR/NVR
6 Once the
configured. In the
Video
switch to the
address, user name (vanderbilt) and password (vanderbilt). Click
connection. If successful, the camera list will appear on the right hand side.
7 After making the initial connection, the
lite blue
between
Zone
and then configure the Time Zone (if necessary). Click
synchronize the date and time.
Note: Time Zone
The
Please ensure that the VEVMS DVR/NVR has the correct Time Zone configured before completing
The VEVMS DVR/NVRs Time Zone is displayed on the Date and Time tab in
has been setup properly, the
lite blue
software, go to
Enable Video Surveillance System Interface
tab. Check off "
Time Zone
VEVMS DVR/NVR
and the
lite blue MUST
in
lite blue
Door Setup --> View or Modify Global Settings
Date / Time settings
and
Utilities --> Set System Date, Time and Time
. Go to
Save Changes
match the Time Zone configured on the VEVMS DVR/NVR.
video settings will need to be
" and enter the IP
Save Changes
to establish a
must be synchronized
before attempting to
lite blue
.
and
Step 5
.