Ad-400 Series Wireless Locks - Vanderbilt lite blue Manual

Chapter 8 Schlage Adaptable AD-400 Series

Frequency agility for increased interference immunity

Addressing
Card formats

The PIM400-485-VBB accepts card formats up to 255 bits.
Operational environment

Temperature: -35°C to +66°C

Humidity: 20% RH to 95% RH (non-condensing)

Operating Voltage: 12 to 24 VDC (Powered from

Power consumption: 300mA max.
Radio frequency (RF)

Spread spectrum

Direct sequencing spread spectrum

Frequency: 902-928 MHz

Data Rate: 62.5 kbps (half duplex)

Modulo 256 error detection

Selectable channels: 1 of 15 standard; 5 groups of 3 increased interference immunity (configurable)

Approvals: FCC and RSS-210 (Canada)

Transmitter Power: Up to 300mW

Receiver Sensitivity: 90dBM typical
Specifications for the PIM400-485-VBB

RS-485 Communication to

Supports 16 Wireless Devices

No SRINX is required

lite blue
can support multiple PIM400-485-VBB

AD-400 Series Wireless Locks

Schlage AD-400 Series locks contain all of the elements needed to electronically control and monitor access
through a door via an RF link. The lock includes a lockset, a Request-to-Exit sensor/switch, a Request-to-Enter
sensor/ switch, a power supply (battery pack), and terminals for monitoring a clutch position switch/sensor, a card
reader, and an RF transceiver for communicating with another RF transceiver in a Panel Interface Module
(PIM400) which then interfaces to
Performance

Verification Time: Typically 0.2 seconds including lock actuation time but not including access panel delays

Communications (Heartbeat)

Wake Up on Radio - Allows the PIM400 to alert the AD-400 locks in case of a Lockdown event.

Addressing
Card reader - Magnetic Stripe Card Reader

ANSI/BHMA A156.25 compliant Track 2 Clock & Data Output (Some card code conversions available)
 Read Rate - 3 – 50 inches per second
VLBIM06/15/15 v4.1.0
- The PIM400 includes an RF Transceiver
lite blue
controller
lite blue
.
lite blue
or locally)
97