Powering Vbb-Ri; Addressing The Vbb-Ri - Vanderbilt lite blue Manual

48 lite blue Installation Manual

Powering VBB-RI

The VBB-RI should receive power directly from a UL 294 Listed Power Limited power supply. Power will be
supplied independently from the lite blue controller.

Addressing the VBB-RI

W10 on the VBB-RI consists of four jumpers that can be combined to set the address for the device. Each VBB-RI
on a lite blue controller RS-485 data channel must have a unique address (1 – 8).
Make a note of the address of the VBB-RI and which channel it is connected to. This information will be required to
set up the lock in the software.
VBB-RI Address Chart
VBB-RI Address
1
2
3
4
5
6
7
8
Jumper Locations
1 2 4 8
2 4 8
1 4 8
4 8
1 2 8
2 8
1 8
8