Main Menu - Delta Modulon DPH series User Manual

7.7

Main Menu

There are three main menu buttons
below.
System Status
Main Menu
Button
MEASUREMENT
SETUP
Modulon DPH Series
UPS-1.1 MEASUREMENT SETUP
Power Flow
POWER FLOW
Maintenance
Power Flow
Bypass
Bypass
Summary
Mains
90 %
5 mins
Press the button to go to the Measurement Menu. In the menu, you can
check the UPS's readings including the following:
1. Main Input
2. Bypass Input
3. Inverter Output
4. Power Module Summary
5. UPS Output
6. Battery Status
For more information, please refer to 7.9 Check System Readings.
Press the button to go to the Setup Menu. In the menu, you can set up the
following settings.
1. Bypass Setting
2. Mode Setting
3. Output Setting
4. Battery & Charging Setting
5. Parallel Setting
6. Dry Contact Setting
7. General Setting
8. IP Setting
9. Control
For more information, please refer to 7.10 UPS Settings.
MEASUREMENT
SETUP MAINTENANCE
MAINTENANCE LOG IN EVENT LOG
Administrator
Description
7-16
; positions are shown in the figure
10:15
May 25,2018
On-Line
Load
30 %