Delta Modulon DPH series User Manual page 143

UPS-1.1 MEASUREMENT
MODE SETTING
On-Line
(Figure 6-30: Select Frequency Conversion Mode)
9 After manually selecting Frequency Conversion mode via the LCD, the UPS will run
in standby mode and the output will be terminated.
10
Press the icon (
Main Screen.
11 Press the ON/ OFF button (
if you want to power on the UPS's inverter. Please select 'YES'.
UPS-1.1 MEASUREMENT
Power Flow
12 After selection of 'YES' to start up the UPS's inverter, each power module will start up
and perform self-inspection.
After the self-inspection is completed, the UPS will automatically transfer to run in
frequency conversion mode and the output frequency will be the same as setup value.
Now, the tri-color LED indicator illuminates green and the following screen appears. For
the tri-color LED indicator location, please refer to Figure 2-11.
SETUP MAINTENANCE
Mode Setting
Select to change system mode
Green ECO
) located in the upper left corner of the screen to go back to the
UPS-1.1
) once and the following screen will pop up to ask you
SETUP MAINTENANCE
POWER ON ?
Yes
(Figure 6-31: Power On Reminder Screen)
6-25
LOG IN EVENT LOG
Administrator
Energy Frequency
Recycle Conversion
LOG IN EVENT LOG
Administrator
No
6 UPS Operation
10:15
May 25,2018
Standby
10:15
May 25,2018
Standby