Additional Operating Issues - Thermo Scientific Corona Veo Operating Manual

8.5.4

Additional Operating Issues

Charged Aerosol Detectors Corona Veo (RS) Operating Manual
3. On the detector display, clear the error code and return to the Main
Menu.
If the error code does not reappear, turn the detector gas flow off
and on. Check the display:
♦ If the error code no longer appears
The excess liquid build-up is removed.
♦ If the error code still appears
Write down the code and wording of the message, and contact
Thermo Fisher Scientific Technical Support for assistance.
This section provides additional issues that may arise during operation of
the Corona Veo (RS) detector in an HPLC system. Locate the table for the
type of symptom you have, find the possible cause, and use the
description of the solution to help you solve your problem quickly.
Also check the detector display for a related warning or error code if an
operating problem occurs. The code and message may provide
additional information.
Note that this section provides information on symptoms and causes
directly related to the charged aerosol detector or the HPLC system. For
information about troubleshooting for the other system modules, refer
to the operating manuals for the other system modules.
TIP If you are unable to resolve a problem following the instructions
given here or if you experience problems that are not covered in this
section, contact Thermo Fisher Scientific Technical Support for
assistance.
8 • Troubleshooting
Page 225