Network Access Authentication Global Settings - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
To view the following window, click Security > Network Access Authentication > Guest VLAN, as
shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
VID
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.

Network Access Authentication Global Settings

This window is used to view and configure the network access authentication global settings.
To view the following window, click Security > Network Access Authentication > Network Access
Authentication Global Settings, as shown below:
Figure 9-73 Guest VLAN window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Enter the VLAN ID used here. This value must be between 1 and
4094.
Figure 9-74 Network Access Authentication Global Settings window
333