Poe (Dgs-1510-28P Only); Poe System - D-Link DGS-1510 Series Web Ui Reference Manual
Gigabit ethernet smartpro switch
Hide thumbs
Also See for DGS-1510 Series:
- Reference manual (711 pages) ,
- Getting started manual (65 pages) ,
- Hardware installation manual (64 pages)
Table of Contents
Advertisement
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Maximum Receive Frame Size
Click the Apply button to accept the changes made.
PoE (DGS-1510-28P Only)
The DGS-1510-28P switch supports Power over Ethernet (PoE) as defined by the IEEE 802.3af and
802.3at. All ports can support PoE up to 30W. Ports 1-24 can supply about 48 VDC power to Powered
Devices (PDs) over Category 5 or Category 3 UTP Ethernet cables. The Switch follows the standard PSE
(Power Sourcing Equipment) pinout Alternative A, whereby power is sent out over pins 1, 2, 3 and 6. The
Switches work with all D-Link 802.3af capable devices.
The Switch includes the following PoE features:
•
Auto-discovery recognizes the connection of a PD (Powered Device) and automatically sends power
to it.
•
The Auto-disable feature occurs under two conditions: firstly, if the total power consumption exceeds
the system power limit; and secondly, if the per port power consumption exceeds the per port power
limit.
•
Active circuit protection automatically disables the port if there is a short. Other ports will remain
active.
Based on 802.3af/at PDs receive power according to
the following classification:
Class
Maximum power used by PD
0
12.95W
1
3.84W
2
6.49W
3
12.95W
4
25.5W
PoE System
This window is used to configure the PoE system, and display the detailed power information and PoE
chip parameters for PoE modules.
To view the following window, click System > PoE > PoE System, as shown below:
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Enter the maximum receive frame size value here. This value must be
between 64 and 9216 bytes. By default, this value is 1536 bytes.
PSE provides power according to the following classification:
Class
0
1
2
3
4
16
Max power supplied by PSE
16.2W
4.2W
7.4W
16.2W
31.6W
Advertisement
Table of Contents
