D-Link DGS-1510 Series Web Ui Reference Manual page 397

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
address>, VLAN <vlan-id>, on <interface-id>).
Parameters description:
type: The type of ARP packet, it indicates that ARP packet is request or
ARP response.
Event description: This log will be generated when DAI detect valid ARP packet.
Log Message: Legal ARP <type> packets (IP: <ip-address>, MAC: <mac-
address>, VLAN <vlan-id>, on <interface-id>).
Parameters description:
type: The type of ARP packet, it indicates that ARP packet is request or
ARP response.
DDM
Log Description
Event description: when the any of SFP parameters exceeds from the warning
threshold.
Log Message: Optical transceiver <interface-id> <component> <high-low> warning
threshold exceeded.
Parameters description:
interface-id: port interface ID.
component: DDM threshold type. It can be one of the following types:
temperature
supply voltage
bias current
TX power
RX power
high-low: High or low threshold.
Event description: when the any of SFP parameters exceeds from the alarm
threshold.
Log Message: Optical transceiver <interface-id> <component> <high-low> alarm
threshold exceeded.
Parameters description:
interface-id: port interface ID.
component: DDM threshold type. It can be one of the following types:
temperature
supply voltage
bias current
TX power
RX power
high-low: High or low threshold.
Event description: when the any of SFP parameters recovers from the warning
threshold.
Log Message: Optical transceiver <interface-id> <component> <high-low> warning
threshold exceeding back to normal.
Parameters description:
interface-id: port interface ID.
component: DDM threshold type. It can be one of the following types:
temperature
389
Informational
Severity
Warning
Critical
Warning