D-Link DGS-1510 Series Web Ui Reference Manual page 208

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Time Range
Action
After selecting the SCTP option as the Protocol Type, the following section will appear.
Figure 8-27 ACL Configuration Wizard (Add Rule for IPv6 ACL) SCTP window
The dynamic fields that can be configured are described below:
Parameter
Fragments
Source
Destination
DSCP
Flow Label
Enter the name of the time range to associate with this ACL rule.
Select the action that this rule will take here. Options to choose from
are Permit and Deny.
Description
Select the Fragments option to include packet fragment filtering.
Select and enter the source information here. Options to choose from
are Any, Host, and IPv6. When the Any option is selected, any source
traffic will be evaluated according to the conditions of this rule. When
the Host option is selected, enter the source host's IPv6 address here.
When the IPv6 option is selected, the Prefix Length option will also be
available. Enter the source IPv6 address and prefix length value in the
spaces provided.
Select and enter the destination information here. Options to choose
from are Any, Host, and IPv6. When the Any option is selected, any
destination traffic will be evaluated according to the conditions of this
rule. When the Host option is selected, enter the destination host's
IPv6 address here. When the IPv6 option is selected, the Prefix
Length option will also be available. Enter the destination IPv6
address and prefix length value in the spaces provided.
Select or enter the DSCP value used here. This value must be
between 0 and 63.
Enter the flow label value here. This value must be between 0 and
200