Dhcp Server Screening Port Settings - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Click the Delete Profile button to remove the specified profile.
The fields that can be configured for Log Information are described below:
Parameter
Log Buffer Entries
Click the Apply button to accept the changes made.
Click the Clear Log button to clear the log.

DHCP Server Screening Port Settings

This window is used to view and configure the DHCP server screening port settings.
To view the following window, click Security > DHCP Server Screening > DHCP Server Screening
Port Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Description
Enter the logged buffer entries value here. This value must be between
10 and 1024. By default, this value is 32.
Figure 9-60 DHCP Server Screening Port Settings window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
318