Mstp Port Information; Loopback Detection - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

MSTP Port Information

This window is used to view and configure the MSTP port information settings.
To view the following window, click L2 Features > Spanning Tree > MSTP Port Information, as shown
below:
The fields that can be configured are described below:
Parameter
Unit
Port
Click the Clear Detected Protocol button to clear the detected protocol settings for the port selected.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Loopback Detection

The Loopback Detection (LBD) function is used to detect the loop created by a specific port. This feature
is used to temporarily shut down a port on the Switch when a CTP (Configuration Testing Protocol)
packet has been looped back to the Switch. When the Switch detects CTP packets received from a port
Figure 5-31 STP Instance window
Figure 5-32 MSTP Port Information window
Description
Select the switch unit that will be used for this configuration here.
Select the port number that will be cleared here.
108