Password Encryption - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
User Name
Privilege
Password Type
Password
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified user account entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Session Table tab, the following page will appear.
A list of active user account session will be displayed.

Password Encryption

This window is used to configure whether to save the encryption of the password in the configuration file.
To view the following window, click Management > Password Encryption, as shown below:
Figure 4-1 User Management Settings window
Description
Enter the user account name here. This name can be up to 32
characters long.
Enter the privilege level for this account here. This value must be
between 1 and 15.
Select the password type for this user account here. Options to choose
from are None, Plain Text, and Encrypted.
After selecting either Plain Text or Encrypted as the password type,
enter the password for this user account here.
Figure 4-2 Session Table window
32