Configuration Restore From Tftp - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore
from HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Unit
Source URL
Destination URL
Replace
Click the Restore button to initiate the configuration restore.

Configuration Restore from TFTP

This window is used to initiate a configuration restore from a TFTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore
from TFTP, as shown below:
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
Figure 13-6 Configuration Restore from HTTP window
Description
Select the switch unit that will be used for this configuration here.
Enter the source filename and path of the configuration file located on
the local PC. This field can be up to 64 characters long. Alternatively
click the Browse button to navigate to the location of the configuration
file located on the local PC.
Enter the destination path and location where the configuration file
should be stored on the Switch. This field can be up to 64 characters
long. Select the running-config option to restore and overwrite the
running configuration file on the Switch. Select the startup-config
option to restore and overwrite the start-up configuration file on the
Switch.
Select this option to replace the current running configuration.
Figure 13-7 Configuration Restore from TFTP window
Description
Select the switch unit that will be used for this configuration here.
Enter the TFTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
374