DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Capabilities
Network Policy
PSE
Inventory
Click the Apply button to accept the changes made.
LLDP Statistics Information
This window is used to view the neighbor detection activity, LLDP Statistics and the settings for individual
ports on the Switch.
To view the following window, click L2 Features > LLDP > LLDP Statistics Information, as show below:
Figure 5-56 LLDP-MED Port Settings window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select this option to enable or disable transmitting the LLDP-MED
capabilities TLV.
Select this option to enable or disable transmitting the LLDP-MED
network policy TLV.
Select this option to enable or disable transmitting the LLDP-MED
extended power via MDI TLV, if the local device is PSE device or PD
device.
Select this option to enable or disable transmitting the LLDP-MED
inventory management TLV.
133