Error Types - Siemens SIMATIC ET 200S Operating Instructions Manual

2PULSE
5.6 Diagnostics
5.6.2

Error types

For information on the structure of the channel-related diagnostics, refer to the manual on
the interface module used in your ET 200S station.
2PULSE error types
The following table shows the error types on the 2PULSE.
Error class
1 00001: Short circuit
D
9 01001: Error
D
16 10000: Parameter assignment
D
error
A simple error evaluation is also possible through the corresponding bits in the feedback
interface (Page 353).
322
Meaning
Short circuit of the sensor supply or the
actuator.
A drop in the 24 V supply voltage can
also result in this error message.
Internal module error occurred.
Parameters have not been assigned to
the module.
Remedy
Check the wiring to the switches and
actuators. Correct the process wiring.
Replace the module.
Correct the parameter assignment.
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07