Operating Modes And Application Areas Of The 1Count5V - Siemens SIMATIC ET 200S Operating Instructions Manual

3.5

Operating modes and application areas of the 1Count5V

Introduction
To begin with, decide how you want to use the 1Count5V. You can choose from the following
operating modes:
Counting modes
Count continuously
Count once
Count periodically
Parameters are assigned to the various modes. You will find the parameter lists in the descriptions of the modes.
You can integrate the 1Count5V in your project in two different ways. Decide whether you want to work with a GSD file or
with STEP 7.
Integrate 1Count5V using STEP 7
Select an entry from the hardware catalog that corresponds to the operating mode you want.
For counting modes,
select the "1Count5V
Counting Mode V2.0" entry
The number 6ES7 138-
4DE02-0AB0 C appears
in the infotext. Drag the entry
to the slot at which you have
mounted your 1Count5V.
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07
Measuring modes
Frequency measurement
Rotational speed measurement
Period measurement
Integrate the 1Count5V with STEP 7
(in isochronous and non-isochronous mode)
For measuring modes,
select the "1Count5V
Measuring Mode V2.0" entry
The number 6ES7 138-
4DE02-0AB0 M appears
in the infotext. Drag the entry
to the slot at which you have
mounted your 1Count5V.
Select the parameters.
3.5 Operating modes and application areas of the 1Count5V
Position feedback
Position detection
For position detection,
select the "1Count5V
Position Detection V2.0"
entry
The number 6ES7 138-
4DE02-0AB0 W appears
in the infotext. Drag the entry
to the slot at which you have
mounted your 1Count5V.
Fast mode
Position feedback in short
(isochronous) cycles
For fast mode,
select the "1COUNT5V Fast
Mode V2.0" entry
The number 6ES7 138-
4DE02-0AB0 F appears
in the infotext. Drag the entry
to the slot at which you have
mounted your 1Count5V.
1Count5V
127