Siemens SIMATIC ET 200S Operating Instructions Manual page 88

1Count24V
2.8 Fast mode
Access to the Feedback Interface in STEP 7 Programming
Feedback interface
Error Detection in Fast Mode
The encoder supply short circuit error is detected by the 1Count24V and indicated in the
feedback interface (EXTF).
The fault indication in the feedback interface is extinguished as soon as this error is no
longer detected by the 1Count24V.
The parameter error bit is acknowledged by means of a correct parameter assignment.
88
Configuring with STEP 7 using HW Config
Load command, e.g. L PID
Operating Instructions, 06/2010, A5E00124867-07
Technological Functions