Siemens SIMATIC ET 200S Operating Instructions Manual page 132

1Count5V
3.6 Count Modes
Influencing the Behavior of the Digital Outputs via
● Hysteresis
● Pulse duration
(see section "Behavior of the Outputs in Count Modes (Page 147)")
Values that Can Be Changed During Operation
● Load value (LOAD_PREPARE)
● Counter status (LOAD_VAL)
● Comparison value 1 (CMP_VAL1)
● Comparison value 2 (CMP_VAL2)
● Function and behavior of the digital outputs (C_DOPARAM)
(see sections "Behavior of the Outputs in Count Modes (Page 147)" and "Assignment of the
Feedback and Control Interface for the Count Modes (Page 155)")
132
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07