Siemens SIMATIC ET 200S Operating Instructions Manual page 114

1Count24V
2.12 Behavior at CPU-Master-STOP
Automatic New Parameter Assignment
A new parameter assignment of the ET 200S station is made by your CPU/ DP master:
● Upon power on of the CPU/DP master
● Upon power on of the IM 151/IM 151 FO
● After failure of the DP transmission
● Upon loading changed parameters or configuration of the ET 200S station to the CPU/DP
● When the 1Count24V is plugged
● Upon power on or inserting of the appropriate power module
114
master
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07