Siemens SIMATIC ET 200S Operating Instructions Manual page 128

1Count5V
3.5 Operating modes and application areas of the 1Count5V
Integrate the 1Count5V with the GSD file
Select the entry C 6ES7 138-4DE02-
0AB0 1CNT5V
for counting modes
Note
Fast mode is designed for use in especially short isochronous cycles. You need STEP 7 to
configure isochronous operation.
128
Integrate 1Count5V with the GSD file
(only in non-isochronous mode)
Select an entry in the GSD file that corresponds
to the operating mode you want.
Select the entry M 6ES7 138-4DE02-
0AB0 1CNT5V
for measuring modes
Select the parameters.
Select the entry W 6ES7 138-4DE02-
0AB0 1CNT5V
for position feedback
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07