Synchronization - Siemens SIMATIC ET 200S Operating Instructions Manual

2.9.5

Synchronization

Synchronization
In order to use this function, you must first select it with the "Synchronize on Positive Edge"
Function DI parameter.
Figure 2-39 Once-Only and Periodic Synchronization
If you have configured synchronization, the positive edge of a reference signal on the input
sets the 1Count24V to the load value.
You can select between once-only and periodic synchronization ("Synchronization"
parameter).
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07
1Count24V
2.9 Position feedback
99