Preface - Siemens SIMATIC ET 200S Operating Instructions Manual

Preface

How this Manual Is Structured...
This manual is supplementary to the
The ET 200S Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/1144348) operating instructions
provide comprehensive information pertaining to the hardware configuration, installation,
wiring, commissioning, diagnostics and technical specifications of the ET 200S distributed
I/O system.
This manual provides a description of functions and the technical specifications of the
ET 200S modules for technological functions: 1Count24V, 1Count5V, 1SSI and 2PULSE.
How to Find Your Way Around
At the beginning of each section you will find a Product Overview, which lists the features
and applications of the module described. You will also find the order number of the module
and the name and release of the software required. For the current GSD file, go to:
●
In each section you will then find a section with the heading Brief Instructions on
Commissioning. These brief instructions tell you in a series of short steps how to install and
configure the module, how to integrate it in your use program, and how to test it in your user
program.
Index
The index contains keywords that come up in the manual.
Standards and approvals
For information about standards and approvals, refer to the section "General technical
specifications" in the ET 200S Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/1144348) operating instructions.
Recycling and disposal
The ET 200S 1Count24V, ET 200S 1Count5V, ET 200S 1SSI and ET 200S 2PULSE
modules can be recycled due to the non-toxic materials from which they are assembled. For
environmentally sustainable recycling and disposal of your old device, contact a certified
disposal service for electronic scrap.
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07
http://www.automation.siemens.com/csi/gsd
ET 200S Distributed I/O System
1
operating instructions.
7