Siemens SIMATIC ET 200S Operating Instructions Manual page 28

1Count24V
2.6 Count Modes
Values that Can Be Changed During Operation
● Load value (LOAD_PREPARE)
● Counter status (LOAD_VAL)
● Comparison value 1 (CMP_VAL1)
● Comparison value 2 (CMP_VAL2)
● Function and behavior of the digital outputs (C_DOPARAM)
(see sections "Behavior Types of the Outputs in Count Modes (Page 37)" and "Assignment
of the Feedback and Control Interface for the Count Modes (Page 45)")
28
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07