Sensor Specifications - ProMinent Aegis-II Assembly And Operating Instructions Manual

12.3 Sensor Specifications

Measuring range connection
type mV:
Connection type mA (ampero
metric measured variables,
measuring ranges according
to the sensors):
Connection type mV (potentio
metric measured variables,
measuring ranges according
to the transmitters):
Conductivity (variable ohm)
Conductivity (measuring
ranges according to the
transmitters):
Temperature:
pH resolution:
ORP voltage:
Temperature:
Amperometric analysis
Accuracy: based on the full-
scale reading
pH/ORP measurement input: Input resistance > 0.5 x 10
Correction variable:
Temperature compensation
range:
pH compensation range for
chlorine:
Table 19 Sensor Specifications
Measuring Range/Measured value
pH: 0.00 ... 14.00
ORP voltage: -1500 ... +1500 mV
Chlorine
Bromine
Peracetic acid
Toroidal Conductivity
pH
ORP millivoltage
0 – 5,000μS
0 – 5,000μS in a digital signal
via Pt 100/Pt 1000, measuring range 0 ... 150 °C
0.01
1 mV
0.1 °C
(Chlorine 0.001/0.01 ppm, 0.01 Vol. %, 0.1 Vol. % etc.):
0.3 %
Temperature via Pt 100/Pt 1000
0 ... 150 °C
6.5 ... 8.5
Page 95 of 102
Using the USB Port
12
Ω