Table of Contents
Advertisement
11.3 Time and Date:
To Set Time and Date:
1- Press MENU
2- Use Up/Down Arrows to navigate to System
then press OK
3- Scroll to Time & Date then press OK
4- Use Up/Down and Left/Right Arrow keys to set
the Time
5- Use F3, Up/Down and Left/Right Arrow keys to
set Date
6- Use F2, Up/Down and Left/Right Arrow keys to
set Week day then press OK
7- Use ESC key to Exit and back to main display
11.4 Set Sensor Type
Select the input letter then select the type.
11.5 Passwords – Login/Logout.
Use this section to change your password if the
password option is enabled. If not enabled, See
11.2.2 Keypad Passwords to turn protection on/off.
11.5.1 How to Set Keypad Password:
1- To Set Keypad password Press MENU
2- Use Up/Down Arrow keys to navigate to
SYSTEM then press OK
3- Use Up/Down Arrow keys to navigate to
Passwords then press OK
4- Use Up/Down and Left/right Arrow keys
to set your desire password (F2 on
alpha for lower case letter, F2 on
Number for Digits, F2 on ALPHA for
Capital letter), use F1 to save password
Keep in mind that the choice just before the
button is pushed is the selected character
type. Example: if the text above F2 says
"alpha" pressing the F2 key once changes to
lowercase.
Then use F1 to save the change Use ESC key to
Exit
11.6 Activity Log
Note: Most recent activities are shown first
1- To see the Activity Log, Press MENU
2- Use Up/Down Arrow keys to navigate to
SYSTEM then press OK
3- Use Up/Down Arrow keys to navigate to
Activity Log then press OK
4- Use F3 to set the Date (this will be a date that
you want to see the activity for all I/O)
5- Set the date using Navigation keys and then
press F1
6- The activities will be shown based on the
Letters (for inputs) and digits (for outputs)
7- Use F1 key to go to Next activity and use Down
arrow key to momentarily see the stamped time
for that activity
8- Use ESC key to Exit
Page 91 of 102
System Menu
Advertisement
Table of Contents
