Table of Contents
Advertisement
13 Using the USB Port
13.1 Capturing Data
The Aegis II logs all sensors, flow switches, meter values, relay ON times,
fed volumes and status every 5 minutes. This data is easily captured from
the USB port located behind the communication light cover.
1- Insert a USB flash drive into the USB port shown. The OLED screen
will acknowledge the drive
USB drive active
Offline, All STOP
LOG
UPDATE
2- Choose F1, LOG to set up the download.
Select upload size
ESC to previous
DAY
WEEK
3- Choose the amount of history, DAY [F1], WEEK [F2], or MONTH [F3]. When you choose the period, the
download starts.
During the download, the keypad and browser connection are locked.
4- The display will show the progress of the download
5- Once complete, the display will show the file name uploaded to the USB flash
drive (ending in "csv"), the size of the file in number of records or time stamps,
and instructs you to remove the drive to return the controller to normal
operation.
6- Don't forget to close and re-secure the access door to assure the interior of the controller is not subjected to
moisture or corrosive fumes from the environment.
No special conversion program or Excel add-in is needed to import the CSV formatted data into Microsoft Excel
or similar spreadsheet programs. Refer to your spreadsheet or graphing software product to learn how to import
CSV data. (CSV = Comma Seperated Value)
Table 20 Partial example of captured data
CONFIG
MONTH
Page 96 of 102
Spare Parts and Accessories
Phillips head screw
Figure
64
USB Access Door
Closed [Top] and Open [Bottom]
Select upload size
ESC to previous
Log#38 of 288
AP16101399.hex
288 Log records
Remove USB drive
®
Advertisement
Table of Contents
