In addition to setting the instrument's clock, other setup tasks include:
Enabling Bluetooth (can be done on the instrument or via DataView)
Setting measurement units to °F or °C (can be done on the instrument or via
DataView)
Changing the Auto OFF interval (requires DataView)
Detailed information for configuring the instrument via the DataView Data Logger Control
Panel is available by pressing the Help button.
Enabling Bluetooth
Long press (>2 seconds) the
Selecting Temperature Units
Model 1821: Short press
Models 1822 and 1823: Long press
Selecting Sensor Type (Models 1821 and 1822)
After inserting the sensor(s), press and hold down the
through a list of available thermocouple types; when the correct type is displayed release
.
The Model 1823 automatically detects the probe type (RTD100 and RTD1000).
INSTRUMENT CONFIGURATION
button to enable/disable Bluetooth.
to toggle between °C and °F.
to toggle between °C and °F.
button. The LCD cycles
4