Table of Contents
Advertisement
INSTRUMENT CONFIGURATION
In addition to setting the instrument's clock, other basic setup tasks include:
• Enabling Bluetooth (can be done on the instrument or via DataView
• Setting measurement units (can be done on the instrument or via DataView
• Changing the Auto OFF interval (requires DataView
Detailed information for configuring the instrument via the DataView
Logger Control Panel is available by pressing the Help button.
ENABLING BLUETOOTH
Long press (> 2 seconds) the
SELECTING TEMPERATURE UNITS
Press
to toggle between lx (lux) and fc (foot-candles).
OPERATION
Making Measurements
1.
Remove the cap protecting the sensor.
2.
Place the sensor in the location to be measured, ensuring you do not
position yourself between the sensor and light source(s).
3.
If the instrument is OFF, press and hold down the
turns ON. The instrument displays the current time, followed by the
measurement.
4.
To change the units of measure, long-press the
will continue to use this unit when next turned ON.
5.
To save the measurement to the instrument's memory, press the
button.
Recording Measurements
You can start and stop a recording session on the instrument. Recorded data
is stored in the instrument's memory, and can be downloaded and viewed on a
computer running the DataView
You can record data by pressing the
• A short press (MEM) records the current measurement(s) and date.
• A long press (REC) starts the recording session. While the recording is in
progress, the symbol REC appears at the top of the display. A second long
press of
stops the recording session. Note that while the instrument is
recording, a short press of
To schedule recording sessions, and download and view recorded data, see the
DataView
Data Logger Control Panel Help.
®
Lightmeter Model 1110 Quick Start Guide
button to enable/disable Bluetooth.
Data Logger Control Panel.
®
button:
has no effect.
®
)
®
Data
®
button until it
button. The instrument
)
)
®
7
Advertisement
Table of Contents
