Performing Ping Tests - Intermec 6400 User Manual

6400 TCP/IP Client
2-26 6400 Computer TCP/IP Client User's Guide
Use a text editor to open AUTOEXEC.BAT. The /D
"
switch for ELANCFG sets your 6400 computer's sleep
timeout. The default is 24 seconds. The range is 0, or
4 to 1024 in increments of 4 seconds. A value of 0
disables the sleep timeout. Ensure the /D switch is
properly set.
If you want the dhcp command to run when you start
your 6400 computer, ensure the command is entered
in AUTOEXEC.BAT, after the ETHDRV.EXE
command.
If you want the snmpd command to run when you
start your 6400 computer, ensure the command is
entered in AUTOEXEC.BAT, after the ETHDRV.EXE
command.

Performing Ping Tests

Do the following in the order given:
1. Ping the access point from the server (host).
2. Ping the access point from the 6400 TCP/IP client.
3. Ping the server (host) from the 6400 TCP/IP client.
4. Ping the 6400 TCP/IP client from the server (host).
Usage and command line options for the ping command
start on page 2 34.
SECTION 2