Intermec 6400 User Manual page 2

" NOTICE

" NOTICE
The information contained herein is proprietary and is provided solely for the
purpose of allowing customers to operate and service Intermec manufactured
equipment and is not to be released, reproduced, or used for any other purpose
without written permission of Intermec.
We welcome your comments concerning this publication. Although every effort has
been made to keep it free of errors, some may occur. When reporting a specific
problem, please describe it briefly and include the book title and part number, as
well as the paragraph or figure number and the page number.
Send your comments to:
Intermec Technologies Corporation
Publications Department
550 Second Street SE
Cedar Rapids, IA 52401
INTERMEC, NORAND are registered trademarks of Intermec Technologies
Corporation.
INTERMEC, NORAND, and PEN*KEY are registered trademarks and
ENTERPRISE WIRELESS LAN, UAP, and UNIVERSAL ACCESS POINT are
trademarks of Intermec Technologies Corporation.
1998 Intermec Technologies Corporation. All rights reserved.
This publication printed on recycled paper.
Acknowledgments
FTP Software and PC/TCP are registered trademarks of FTP Software, Inc.
HP is a registered trademark and HP OpenView is a trademark of
Hewlett Packard Company.
IBM is a registered trademark of International Business Machines Corporation.
MS DOS is a registered trademark of Microsoft Corporation.
Proxim is a registered trademark of Proxim, Inc.
UNIX is a registered trademark in the United States and other countries, licensed
exclusively through X/Open Company, Ltd.
FCC Computer Compliance
This equipment meets Class B digital device limits per Part 15 of FCC Rules.
These limits protect against interference in a residential area. It emits, uses, and
can radiate radio frequency energy. If you do not install and use the equipment
according to its instructions, it may interfere with radio signals. However, there is
no guarantee that interference will not occur in a particular installation.