Intermec 6400 User Manual page 30

6400 TCP/IP Client
Use
1. IP Config Parms g
2. DHCP Client
3. SNMP Agent
4. Advanced
5. Exit
2-4 6400 Computer TCP/IP Client User's Guide
The Main Menu screen (and some other screens) also
displays the command prompt ( _ ). At the prompt, type the
number of the option you want to view or modify and then
press [ENT]. The following chart describes how to use 6400
TCP/IP client options.
To
Set these configuration parameters:
2.4 GHz OpenAir radio: LAN ID (default: 000)
"
IP address (default: 000.000.000.000)
"
Subnet mask (default: 255.255.255.255)
"
Router (default: 000.000.000.000)
"
Domain server (default: 000.000.000.000)
"
Parameter descriptions start on page 2 5.
Enable your 6400 computer (the client) to obtain IP
addresses from a DHCP or Bootp server on the network.
By default, DHCP is disabled. DHCP settings are
described on page 2 8.
Enable other hosts and network management stations
using SNMP to examine 6400 computer statistics and
configuration information over the network. By default,
SNMP is disabled. SNMP settings are described on page
2 9.
Set these advanced parameters:
2.4 GHz OpenAir radio: Security ID (default:
"
INTERMEC)
802.11 DS radio: Network name (default:
"
INTERMEC)
6400's sleep timeout (default: 24 seconds)
"
Parameter descriptions start on page 2 9.
Return to the DOS prompt.
SECTION 2