Checking The Arp Server Mode Setting; Troubleshooting The Dhcp Client - Intermec 6400 User Manual

Troubleshooting Network Connections

Troubleshooting the DHCP Client

3-20 6400 Computer TCP/IP Client User's Guide
Checking the ARP Server Mode
Setting
The Enterprise Wireless LAN ARP server should be
enabled for 6400 computer TCP/IP client connectivity
applications. The access point ships with the ARP server
disabled. Enable the ARP server in the access point as
follows:
If access point flooding is disabled or set low, use the
"
No Flooding setting for ARP Server Mode.
If access point flooding is set high, use the Normal
"
Flooding setting for ARP Server Mode.
For information about ARP server mode settings and how
to set them, refer to the 21XX Universal Access Point
Technical Reference Manual (P/N
Access Point User's Guide.
Following is a possible solution to a situation you may
encounter when using the DHCP client to get network
configuration information. The system message is
described first, followed by recommended courses of action.
DHCP servers not responding! Please contact
your network administrator.
SECTION 3
067150
) or the 6710