Filtering - Intermec 6400 User Manual

SECTION 2
" NOTE:
" NOTE:
For the 6710 Access Point:
Global Flooding Option
Inbound
Outbound to Secondaries
Outbound to Stations
Page 3-19 in Section 3 contains information about troubleshooting
flooding levels.

Filtering

The access point's Ethernet port can be configured to
support preconfigured and custom input filters. Setting
filters prevents unnecessary traffic from the wired LAN
from being forwarded onto the wireless medium. This is
important because common wireless technologies operate at
data rates below Ethernet speeds.
By default, the access point is configured for no filtering.
For 6400 TCP/IP client communications, it is recommended
that you not set any filters.
Page 3-19 in Section 3 contains information about troubleshooting
filtering levels.
Default
Multicast
Primary
Disabled
Disabled
6400 Computer TCP/IP Client User's Guide
6400 TCP/IP Client
Default
Unicast
Disabled
Disabled
Disabled
2-21