Intermec 6400 User Manual page 116

INTERSVR/INTERLNK Connection
A-4 6400 Computer TCP/IP Client User's Guide
For a successful installation, do the following:
Connect your 6400 computer to an external power
"
supply before updating Flash memory. The external
power source prevents the Flash from being corrupted
if all power fails during the update process.
Ensure your 6400 computer is operating properly. You
"
must have an operational 6400 computer to update
Flash memory.
The installation process creates a RAM (D) drive on
"
your 6400 computer. If a RAM (D) drive already
exists, save any files on the drive to another location
and then delete them from the RAM (D) drive.
Ensure your 6400 computer has at least 960 KB of
"
disk space available for creation of the RAM (D) drive.
To prepare for the installation:
1. Copy the files on the 6400 TCP/IP client installation
disk into a directory called C:\PENKEY\FLASH on
your personal computer.
2. Change to C:\PENKEY\FLASH.
3. Run self extracting file 64IPPR10.EXE (2.4 GHz
OpenAir radio) or 64IPLU10.EXE (802.11 DS radio) to
extract the 6400 TCP/IP client installation files.
4. After all the files have been extracted, delete
64IPPR10.EXE or 64IPLU10.EXE from
C:\PENKEY\FLASH.
APPENDIX A