Using The Snmp Mib Browser; Identifying Tcp/Ip Client Issues; Power Management 1 - Intermec 6400 User Manual

Troubleshooting Network Connections

Using the SNMP MIB Browser

Identifying TCP/IP Client Issues

3-14 6400 Computer TCP/IP Client User's Guide
If you cannot establish a connection to the remote host by
using its IP address, the cause of failure could be that the
remote network or its gateway is not operating. Try using
ping to contact the remote host.
If you think one of these problems is causing the connection
failure, you probably cannot solve the problem alone.
Contact the remote host's system administrator or the
network administrator for help.
An SNMP agent resides at the 6400 computer. The agent
accepts SNMP requests from an SNMP network
management platform and responds with the requested
data. The SNMP agent also services SNMP SET requests
and sends unsolicited messages (traps) when a predefined
event occurs.
When troubleshooting network connections, you may also
need to
2.4 GHz OpenAir radio: verify that the LAN ID and
"
security ID are correct.
802.11 DS radio: verify that the network name is
"
correct.
understand how power management affects
"
communications.
modify IP addresses.
"
increase the ARP timeout value.
"
SECTION 3