Configure The 6400 Tcp/Ip Client - Intermec 6400 User Manual

Quick Start

Configure the 6400 TCP/IP Client

viii 6400 Computer TCP/IP Client User's Guide
5. Do not set any filters (default: no filtering).
For complete information about access point options,
refer to the 21XX Universal Access Point Technical
Reference Manual (P/N 067150) or the 6710 Access
Point User's Guide (P/N 961 047 081).
For information about fine tuning access point options
for use with the 6400 TCP/IP client, see Section 2 in
this user's guide.
1. Open the 6400 computer's TCP/IP client DOS
configuration menus by typing chgparms at the
6400 computer's DOS prompt. The following screen
appears:
Chgparms v4.260
Sep 23 1999
10:33:24
802.11 DS or 2.4 Open Air version
1. IP Config Parms
2. DHCP Client
3. SNMP Agent
4. Advanced
5. Exit