Intermec 6400 User Manual page 64

6400 TCP/IP Client
EXAMPLE 1:
C:\>ping lee.xyz.com
host responding, time = 25 ms
Debugging information for interface ifcust Addr(6): 00 00 c0 ea 93 10
interrupts: 49 (0 receive, 0 transmit)
packets received: 42, transmitted: 7
receive errors: 0, unknown types: 14
runts: 0, aligns: 0, CRC: 0, parity: 0, overflow: 0
too big: 0, out of buffers: 0, rcv timeout: 0, rec reset: 0
transmit errors: 0
collisions: 0, underflows: 0, timeouts: 0, resets: 0
lost crs: 0, heartbeat failed: 0
ARP statistics:
arps received: 9 (7 requests, 2 replies)
bad: opcodes: 0, hardware type: 0, protocol type: 0
arps transmitted: 2 (2 requests, 0 replies)
3 large buffers; 2 free now; minimum of 0 free
3 small buffers; 3 free now; minimum of 1 free
2-38 6400 Computer TCP/IP Client User's Guide
-x 3 dest1...destn Specifies that time stamps will be filled in
-z
-?
-version
To send an echo request to the host lee.xyz.com and display
network debugging information, enter:
only by designated routers (including the
final host on the route). Each recorded time
stamp takes 8 bytes of option space.
Specifies quiet mode, which reports success
or failure rather than full statistics.
Displays and explains the usage line of this
command.
Displays the version and patch level of this
command. Refer to this information if you
call Technical Support.
SECTION 2