Intermec 6400 User Manual page 40

6400 TCP/IP Client
" NOTE:
2-14 6400 Computer TCP/IP Client User's Guide
3. Open the 6400 TCP/IP client's host table file and enter
the following:
127.0.0.1
<host IP address>
For example:
127.0.0.1
192.168.5.40
4. Open the 6400 TCP/IP Client's terminal emulation
menus by pressing the yellow shift key and then the
blue shift (MENU) key. For help, refer to the
PEN*KEY Model 6400 Hand Held Computer User's
Guide.
5. Go to the host name parameter. Enter the variable
located in the host table file followed by a space and
then the port number to which the terminal connects
to the host. For example:
x 1234
You cannot enter the host IP address, a space, and the port
number for the host name parameter because its field is not
long enough.
6. Configure the other terminal emulation parameters as
desired.
LOCALHOST
<variable>
LOCALHOST
x
SECTION 2