Using Dhcp Or Bootp For Ip Addressing; Configuring The Access Point; Access Methods - Intermec 6400 User Manual

6400 TCP/IP Client

Using DHCP or Bootp for IP Addressing

Configuring the Access Point

2-18 6400 Computer TCP/IP Client User's Guide
To automatically assign IP addresses using DHCP or Bootp,
see Using DHCP and Bootp for IP Configuration" on page
2 46.
The 6400 TCP/IP client is supported with the following
versions of the Enterprise Wireless LAN access point
system software.
Access Point
21XX UAP, 2.4 GHz OpenAir radio
21XX UAP, 802.11 DS radio
6710 Access Point, 2.4 GHz OpenAir radio
The following pages briefly describe some access point
configuration options. For complete information, refer to
the 21XX Universal Access Point Technical Reference
067150
Manual (P/N
Guide (P/N 961 047 081).

Access Methods

The access point can be configured locally through its
diagnostics port, or remotely through Telnet or a Web
browser. Remote access requires an IP address that must
be initially set through the access point's diagnostics port.
) or the 6710 Access Point User's
SECTION 2
Version
All releases
3.92
1.32 or greater