Resetting Your CN2B Computer
Performing a Warm-Boot
Performing a Cold-Boot
CN2B Mobile Computer User's Manual
Performing a warm-boot may be necessary to correct conditions where an
application stops responding to the system. It does, however, unload all
running programs.
Press and hold the I/O key for ten seconds, then the CN2B Computer con-
tinues from the screen you were at before you performed the warm-boot.
In some cases where the CN2B Computer completely stops responding, it
may be necessary to perform a cold-boot. Because this may result in data
loss, this procedure is not recommended unless all other recovery methods
have failed.
Note: This deletes all programs and data stored in RAM including the
Object Store. Make sure data is backed up to your host computer or a stor-
age card before performing a cold-boot.
1 Pull the stylus from its place in the back of the CN2B Computer.
Pull the stylus out
2 Using the stylus, press the reset button in the stylus holder.
Press to reset
Chapter 1 — Using the CN2B Computer
11