Table 3 1 Ping Messages - Intermec 6400 User Manual

Troubleshooting Network Connections
3-12 6400 Computer TCP/IP Client User's Guide
Condition Message and Interpretation
Low ARP
If ping fails with one of the following
timeout value
messages:
Ping failed:
Ping failed:
You may need to set your ARP timeout
parameter to a higher value. The default is
1500 ms. For more information about
modifying the value, see page 3 17.
No reply If the other end of the connection does not
reply, you may get the following message:
Ping failed: Timeout.
Possible causes are:
"
"
"
"
Cannot reach If the connection fails because the target host
host cannot be reached, you may get the following
message:
Ping failed: host unreachable:
Dest. Unreachable.
Following are probable causes:
"
Table 3 1
Ping Messages
i f il d ARP failed
ARP timeout
The target host failed.
The network path to the target host failed.
The target host may be turned off.
Conflict on the local 6400 computer due to
an incorrect configuration.
This condition can occur if the IP router
returns an ICMP message with a code of
host unreachable. This normally means
the host's local network can be reached, but
the target host is unavailable.
SECTION 3
f il d