Intermec 6400 User Manual page 111

SECTION 3
This message appears when the DHCP client sends a
broadcast request for configuration information to the
DHCP server and a reply is not received within the timeout
period.
It may be necessary to reconfigure either the initial
"
timeout period (through the dhcp -t option) or the
initial retry count (through the dhcp -r option) in
environments in which a DHCP (or Bootp) server
takes a long time to respond.
DHCP servers that send only broadcast frames
"
require access point flooding. If you are using this
type of DHCP server, you must set global flooding
options on the access point according to the following
charts.
For the 21XX UAP:
Global Flooding Option
Multicast Flood Mode
Multicast Outbound to Terminals
Multicast Outbound to Secondary LANs
Unicast Flood Mode
For the 6710 Access Point:
Global Flooding Option
Inbound
Outbound to Secondaries
Outbound to Stations
Troubleshooting Network Connections
Multicast
Enabled
Enabled
Enabled
6400 Computer TCP/IP Client User's Guide
Setting
Hierarchical
Enabled
Set locally
Disabled
Unicast
Disabled
Disabled
Disabled
3-21