Enabling Or Disabling The Dhcp Client - Intermec 6400 User Manual

6400 TCP/IP Client
2-8 6400 Computer TCP/IP Client User's Guide
Enabling or Disabling the DHCP
Client
Settings for the DHCP Client option are as follows:
1. Enable
2. Disable
3. Exit
Use To
1. Enable Enable the DHCP client, which allows your
6400 computer to retrieve an IP address, IP
subnet mask, IP router address, and domain
server address from a DHCP server. The 6400
computer ignores other configuration options.
Note that if you enable DHCP, the 6400
computer's IP address is ignored.
Enabling the DHCP client creates
DHCPFILE.BAT, which contains DHCP.EXE.
2. Disable Disable the DHCP client. You must manually
(default) set IP addresses before the TCP/IP stack is
enabled. Disabling the DHCP client deletes
DHCPFILE.BAT.
3. Exit Return to the Main Menu.
DHCP is described in detail on page 2 46, Using DHCP
and Bootp for IP Configuration."
SECTION 2