Checking The Connection Status With A Ping Test; Turning A Network Connection On Or Off; Configuring Wireless Or Ethernet Network Settings - Intermec CN50 User Manual

Chapter 7 — Configuring the Computer

Checking the Connection Status with a Ping Test

Turning a Network Connection On or Off

Configuring Wireless or Ethernet Network Settings

66
Use the following procedure to check the connection status with a
ping test.
1 Tap the iConnect icon (
screen.
2 Choose Tools > Ping Test.
3 Choose Ethernet or Wireless from the connection type list.
4 Choose Ping my gateway or DHCP server if you are using DHCP.
Or, choose Ping the host address below and enter the host
address in the entry field.
5 Tap Ping. The ping test runs and checks your connection. If the
connection is OK, "Connection Validated" appears.
Use the following procedure to turn a network connection on or off.
1 Tap the iConnect icon (
screen.
2 Choose Enable and then choose a network connection from the
list. A check mark next to the connection type indicates that the
connection is enabled.
Use the following procedure to configure or change wireless or
Ethernet network settings.
1 Tap the iConnect icon (
screen.
2 Do one of the following:
a Choose Tools > Wireless IP Settings.
b Choose Tools > Ethernet IP Settings.
CN50 Mobile Computer User's Manual for Windows Embedded Handheld 6.5
) in the lower right corner of the Today
) in the lower right corner of the Today
) in the lower right corner of the Today