SECTION 2
Tftp
tftp (get | overwrite| put) local_file host remote_file
[image]
tftp serve
The tftp command transfers a single file between your
6400 computer and a remote TFTP server, without
requiring authentication.
get
Transfers a file from a remote machine to your
6400 computer.
host
Specifies the hostname or IP address of the
remote host.
image
Transfers a binary file.
local_file
Specifies a local 6400 computer filename.
overwrite
Overwrites the existing local file on your 6400
computer.
put
Transfers a file to the remote machine.
remote_file
Specifies a remote filename.
serve
Starts a TFTP server on a local 6400 computer.
To end the server program, use the interactive command q.
6400 Computer TCP/IP Client User's Guide
6400 TCP/IP Client
2-45