Intermec 6400 User Manual page 13

2. Select IP Config Parms to set these options:
2.4 GHz OpenAir radio: LAN ID, which must
"
match the access point's LAN ID. (Default: 0.)
6400 computer's IP address (default:
"
000.000.000.000) .
Subnet mask (default: 255.255.255.255).
"
Router (optional) (default: 000.000.000.000).
"
Domain server (optional) (default:
"
000.000.000.000) .
3. Optionally, set the DHCP Client or SNMP Agent, or
both. (Default for both options: Disabled.)
4. Select Advanced to set the following:
Sleep timeout (default: 24 seconds).
"
2.4 GHz OpenAir radio: Security ID, which must
"
match the access point's security ID. (Default:
INTERMEC for the 6710 Access Point, and no
security ID for the 21XX UAP.)
802.11 DS radio: Network name, which must
"
match the 21XX UAP's network name. (Default:
INTERMEC.)
5. If you are also using 3270, 5250, or VT/ANSI terminal
emulation, are using port 23 (default) for the host
application, and are not using DHCP, do the following:
a. Enter the host's IP address for the host name"
parameter in the 6400 TCP/IP client's terminal
emulation menus. (To open the menus, press the
yellow shift and blue shift keys.)
b. Configure the other terminal emulation parameters
as desired.
If the host application is residing on a port other than
23, configure the 6400 TCP/IP client as follows:
a. For the host table=" parameter in PCTCP.INI,
enter the path of the host table file.
6400 Computer TCP/IP Client User's Guide
Quick Start
ix