Intermec 6400 User Manual page 83

SECTION 2
EXAMPLE:
SEE ALSO:
-n
pctcp.ini_file
-r retries
-t seconds
-v
-w
-?
-version
To retrieve your 6400 computer's IP address and other network
configuration information, timing out if no reply is received within 15
seconds, enter:
C:\>bootp –t 15
Dhcp (page 2-58) and these RFCs:
RFC 951, Bootstrap Protocol (Bootp)
RFC 1531, Dynamic Host Configuration Protocol
RFC 1533, DHCP Options and Bootp Vendor Extensions
RFC 1534, Interoperation Between DHCP and Bootp
Does not update PCTCP.INI or the kernel.
Use this option with the -v option to view the
information retrieved from the server without
changing your kernel parameters.
Specifies the complete path of a PCTCP.INI
file from which bootp reads information and
to which bootp writes information (if -w op
tion is used). This optional setting overrides
the PCTCP= environment variable setting.
Retries sending a bootp request the number
of times specified by retries. Default: 4.
Times out the bootp command process after
waiting seconds seconds for the bootp reply
to be sent from the server. Default: 60.
Displays detailed (verbose) information about
the server's reply.
Writes configuration information received
from the server into PCTCP.INI.
Displays and explains the usage line of this
command.
Displays the version and patch level of this
command. Refer to this information if you
call Technical Support.
6400 Computer TCP/IP Client User's Guide
6400 TCP/IP Client
2-57