Using Lstat.exe; Verifying 6400 Tcp/Ip Client Settings - Intermec 6400 User Manual

6400 TCP/IP Client
" NOTE:
2-24 6400 Computer TCP/IP Client User's Guide

Using LSTAT.EXE

LSTAT.EXE is supported only on the 802.11 DS radio.
To display the 802.11 DS radio's firmware versions and
current operating statistics, type the following commands
at your 6400 computer's DOS prompt:
C:\>lsl
C:\>wvlan43
C:\>lstat
A screen similar to the following appears:
For complete information about each field, refer to the 6400
Computer TCP/IP Client Technical Reference (P/N
977 054 008).
Verifying 6400 TCP/IP Client
Settings
To verify 6400 TCP/IP client settings through the DOS
configuration menus, open the menus by typing the
following at the DOS prompt:
C:\>chgparms
PRI: v4.0
SEC: v4.52
RFLink: Excellent
SNR: 48dBm
SSID: INTERMEC
BSSID: 00601d040f96
TXRate: 2Mb/s std
SECTION 2